|
| |
|
|
|
| |
|
Features |
|
• New Compact Spindles for upgrading your Swiss CNC Turning/Milling Centers with our high speed, precision spindle.
• 5,000-60,000 min-1 Max. output 350W (For φ30)
• AC100-240V for global operation.
• 6 LED load monitor allows the operator to easily Access operating conditions.
• A Safety Relay that complies with EN standard is installed as standard equipment.
• Protection system,External Input/Output control Signal installed.
• Front panel can be detached and extended ; Max.4m length(Option) |
| |
| •E3000 System Chart |
|
| |
(E3000 Control Unit) |
| |
| Cat. No. |
9775(115V) |
| 9776(230V) |
| Model |
NE211 |
| Power Source |
100V-240V |
| Rating Power Consumption |
18A(30) |
| Max.output power Air Flow volume |
350W(For φ30) |
| Weight |
2.8Kg |
| Dimensions |
W88×D138×H238mm |
|
Standard Equipment: Accessories |
• Power Cord 2m • Air Hose with filter • Reducer
• Connector Cap (Provided) • Bracket
• Air Plug (Provided) • Grip • Serew
• Rubber Pad • Fuse(T6.3AL)250V.2pcs |
|
| |
|
| |
|
| |
E3000 Series Motor For Modular Type |
| |
|
| *Collet Chuck and Motor Cord are sold separately |
| *Order with a catalog number |
|
Motor & Motor Cord for One Piece Type & Modular Type Spindle |
| |
• Nakanishi 2 type Motor & Motor Cord |
|
| |
| •EM-3030J intended design is for use with NAKANISHI angle spindles such as:
RAX-271E/71E,RA-271E,RAS-151E and RA-151E.These spindles have a 20,000-30,000min-1 input speed. |
|
|
Spindle with EM 3060 Brushless or EM-3060J Motor |
| |
| ?Product |
CAT.No. |
Model |
Standard Equipment: Accessories |
 |
1583 |
NR-3060S*
(Ceramic Bearing) |
• Chuck Nut(K-265)
• Spanner(12×14):2pcs
• Spanner(22×27):1pcs
*Collet Chuck is sold separately.
Please specify the desired Collet Chuck CHK(PDF462KB) Type size when crdering. |
 |
1565 |
NR-403E
40,000min-1
|
• Collet Chuck
Φ3.0mm(CHK-3.0)
• Chuck Nut (K-265)
• Spanner (12×14):2pcs
• Spanner (22×27):1pc |
 |
1566 |
NR-453E
50,000min-1
(Ceramic Bearing) |
 |
1582 |
Automatic Tool Replacing Spindle
NR40-5100?ATC
50,000min-1
O.D.40mm |
• Collet Chuck Φ3.175mm(CHB-3.175)
• Spanner (6×8)(9×11):1pc
• Bar Wrench |

 |
1580 |
Automatic Tool Replacing Spindle
NR50-5100ATC
50,000min-1
O.D.φ50mm |
• Collet Chuck Φ3.175mm(CHR-3.175mm)
• Spanner(9×11)(12×14):Each 1pc
• Bar Wrench |

 |
1836 |
Lever Type Spindle
NRR-3060
60,000min-1 |
• Collet Chuck Φ3.175mm(CHB-3.175mm)
• Spanner(6.1×8):2pcs
• Spanner(22×27):1pc |
 |
1559 |
RAS-151E
20,000min-1
(90°Angle) |
•
Collet Chuck Φ3.0mm(CHK-3.0)
• Chuck Nut(K-265)
• Spanner(12×14):2pcs
• Spanner(22×27):1pc |
 |
1579 |
RAX-71E
30,000min-1
(90°Angle?
Reduction Ratio
1/6) |
•
Collet Chuck
• Φ3.0mm(CHK-3.0)
• Chuck Nut(K-265)
• Spanner(12×14):2pcs
(22×27):2pcs |
 |
1578 |
RAX-271E
30,000min-1
(90°Angle?
Reduction Ratio
1/1.5) |
 |
1505 |
RA-151E
20,000min-1
(90°Angle) |
• Collet Chuck Φ3.0mm(CH8-3.0)
• Spanner
• (7×5.5)(8×5)(22×27):1pc |
 |
1506 |
RA-271E
20,000min-1
(90°Angle) |
• Collet Chuck Φ3.0mm(CHS-3.0)
• Spanner
• (7×5.5)(8×5)(22×27):1pc |
|
| *Order with a catalog number |
|
Speed Reducer |
| |
| Product |
CAT.No. |
Model |
Standard Equipment: Accessories |
 |
1507 |
ARG-011E
30,000min-1 Reduction Ratio
(1/4) |
-- |
 |
1508 |
ARG-021E
30,000min-1 Reduction Ratio
(1/16) |
-- |
|
| *Order with a catalog number |
| |
E3000 Selector Unit |
|
CAT.No. |
Model |
Power Source |
Rating Power Consumption |
Weight |
Dimensions |
Standard Equipment: Accessories |
9781
(115V) |
NF212
|
AC100V/240V |
0.15A |
1.9kg |
W88×D138×H238mm |
• Power Cord 2m
• Communication Cord to E3000
• Connector Cap
• Air Stop Blug
• Bracket
• Nylon grip
• Screw
• Rubber pad
• Fuse(TI6AL)250V:2pcs.
|
9782
(230V) |
|
| *Order with a catalog number |
| |
Air Line Kit/Reducer |
| |
| Product |
CAT.No. |
Model |
Standard Equipment: Accessories |
 |
1541 |
AL-0201 |
• Filter
•Regulator
•Air Pressure Gauge
• Air ON-OFF valve
• Hose for Pinping
(K-260) 2m |
|
| *Order with a catalog number |
| |
Collet Chuck and chuck nut |
| |
|
<
|